500kg a day avocado fruit oil refining plant

Product Description

500kg a day avocado fruit oil refining plant

Features:
SS304 stainless steel, electric heating, LD dehydration.Cooling water tank.

Function:
Refining cans: Degumming, Dephosphorization, Deacidification.
LD cans: Dehydration, Decolorization.
Filter: Fine filtration.

Use: palm oil, coconut oil, peanut oil, soybean oil, rapeseed oil, avocado oil, sunflower oil and all edible oil.

Features: can achieve low temperature dehydration.
Reduce the cooling water temperature, improve the LD, thereby reducing the boiling point of water to achieve low temperature dehydration.

Equipment introduction:
By degum pot and decoloring cans and hoist system composition, this equipment adopts fullstainless steel material, set the fooSkype： taishan0072rade materials measurement device,automatic temperature control device, adiabatic device and enters the material buffer device,which can realizehair oil degum, take off acid, dry and decoloring function.
Refining crude oil : soybean oil, mustard seed oil, cottonseed oil, sunflower seed oil, peanut oil, rice bran oil, safflower seed oil, corn germ oil, camellia seed oil, etc.
Operating procedures:
Will the filtered virgin oil injection refining machine come unglued cans andwill inject tanktemperature, heating accessories start mixing device, into degum, take offacid refining technology, the dry dehydration after oil with the automatic ascending to decoloring cans,complete the entire oil refining process.
The treatment effect:

The XXJL type small senior edible oil refining machine process after the oilcolour and lustre is pleasant, clear and transparent, longterm placed there were no precipitation,the pot doesn't foam, not smoke, reach national standard, which can be directly oil filling into supermarkets. Suitable for processing and small-scale oil processing use.

Instructions:
Degumming：
When the oil temperature rose to 60-70 ℃, a certain amount of water or electrolyte solution in the agitated by adding crude oil (general salt cheap) the weight of water is generally 2-3 times the oil containing phospholipids, in order to facilitate the operation. Can be added by the experience of oil 3-5% water, water temperature is higher than the oil temperature of 10 ℃, water containing salt by oil 0.2-0.3%, and in 10-15 minutes evenly spSkype： taishan0072ed in the oil.
Dehydration:
Open the stirring, heating switch, the oil temperature rose to 70 ℃ open the LD pump, keep the negative pressure in the 0.4-0.5mpa, oil temperature rose to 95-100 ℃ attention to observation, the oil is too high to overflow. (Such as tank oil refurbished to stop heating, a few minutes and then open the heating), the oil temperature maintained at 105-110 ℃, observe the window without water vapor, stop heating, oil temperature dropped to 80 ℃ when the LD pump, Down to 70 ° C off the mixing, dehydration is complete. The oil into the finished oil tank.

Note: (equipment should be checked before the operation, the parts are leaking, the valve normal use, the motor is running normally, fastening screws, reducer whether refueling, not reversible, LD pump filled with cold water).

Our factory :

Our factory covers an area of 23,000 square meters, including three large-scale production workshops: the machining workshop, assembly workshop and welding workshop, in addition , we also have the painting workshop, polishing workshop, raw materials shop, spare parts warehouse, and finished products warehouse.

We receive about over a hundred times of visist from home and abroad a year .

1