Cooking Oil Manufacturing Plant/Crude Cooking Oil Refinery Machine

Kingdo can supply you full sets of cooking oil making/refinery machine with high-technology and efficiency. We have rich experience in cooking oil plant installation, we have set up small/mini vegetable oil processing plant in China and overseas.

Kingdo Brand Cooking Oil Making Machine, sunflower oil making machine, it is a complete set processing line for sunflower seed oil plant pre-treatment. Including sunflower seeds receiving, impurities eliminating and flaking. High quality cooking oil making machine ensures the excellent pre-treatment effect. Good pre-treatment guarantees the better oil pressing.

General Sunflower oil, Soybean Oil, Cooking Oil making process flow diagram

1. Extraction process of cooking oil making machine

The pre-pressed cake or flake, firstly enters into the seal auger to avoid the solvent gas escaping. Then material enter into the box-chained loop type extractor and counter-currenting with the solvent, the grease is extracted, and miscella concentration increases from 2% to more than 25%. Then miscella is discharged from extractor, and into miscella filter for filtration. After separating fines, miscella enter into the oil tank, then pump into evaporation system. And the leached meal finally drops in DTDC through buried scraper plate.

2. Evaporation process of cooking oil making machine

Using the secondary steam desolventized from DTC desolventizer and produced by steam-jet pump to heat and evaporate micella in the first long-tube evaporator. Export temperature reaches to 58-62℃ and concentration reaches to more than 65%. Then, micella enters into the second long-tube evaporator in which the temperature is heated to 105-110℃ by indirect steam and the concentration reaches to more than 95%. Then miscella enters into stripper in which residual solvent in oil will be removed, the export temperature reaches to about 105℃ and the general volatile of the extracted crude oil is less than 0.30%.

3.Desolventizing process of cooking oil making machine

Wet meals discharged from the bottom of extractor enter the top of DTDC and land on the predesolventizing tSkype： taishan0072ers where they are heated by the indirect steam, thus, some solvent in meal is evaporated and meal temperature is risen; Predesolventized meals land on predesolventizing tSkype： taishan0072ers where they use the second steam in desolventizing tSkype： taishan0072ers to predesolventize solvent from meal, then, meals enter desolventizing layers in which direct steam is injected. Direct steam is spSkype： taishan0072ed into the meals through the bottom holes, and distill the solvent from meal by using steam in order to remove all solvent; Desolventized meals land on the following drying and cooling layer to dry and cool meals,cooled meals land on meal scraper blade from automatic material controlling gate on the bottom of cooling layer, and then they are entered into meal storehouse.

4. Condensation recovery of cooking oil making machine

DTDC is equiped with a separate condenser, 1st and 2nd evaporation share one condenser. Low and high temperature of solvent gas both from 1st and 2nd evaporation enter into the condenser after its neutralization, which greatly reduces the load of condenser and improves the efficiency of condensing. Stripping and analyzing share one condenser, the non-condensable gases from extractor and other condensers enter into the vent gas recovery system through the final condenser.

In the recycling system, the cold paraffin will absorb the solvent gas and the final nonsolvent gas will be discharged through fire resistance valve.Paraffin absorbed the solvent gas can be also called rich oil, after heating by oil-oil heat exchanger and steam, the rich oil will enter into desorber for desorption, and into condenser after changing solvent into gas, the final cooled paraffin can be recycled.

General Cooking oil, Soybean Oil, Sunflower Oil Making Machine Refinery Process

Generally a soybean oil refinery production line including the flowing sections and auxiliary machine:

1. Degumming :Usded to neutrilizing ,and water washing,to rid off the acid .

2. Deodorization:Used to rid off the fetid smell/odour of oil by steam understand of high temperature.

3. Soap feet vessel:Used to refine the oil sediment from oil refiner,to get some oil from oil sediment .
4. Hot & Alkali water tank:Used to produce hot water heated by the steams ,also alkali water from the alkali dis-voling tank,for adding into the oil refiner.
5. Alkali dis-voling tank :Used to produce the alkali water .
6. Steam separator:Separating the steam to oil refiner,de-colorer,deodorizer,hot water tank,etc.

7. Decoloring vessel:Used to rid off the color of the oil
8. Clay tank:Store the medication decolored for the clay tank.
9. Transfer hot oil furance:Contact to the deodorizer part , producing high temperature (280 degrees orso) for deodorization.
10. Gear pump:Pump oil into kinds of vessel and tank.
12.Water pump:Pump cool water into water tank.
13. Transfer hot oil pump:Pump hot oil into transfer oil furance.
14. Cooling water tower:Cool water for cooling oil ,recycling using.

1. Since the establishment of our company, the overall economic indicators including production, sales are in the forefront of the domestic industry.

2. Our products sell well across the country, and we has built friendly cooperation relationships with mouth Ukraine, Vietnam, India, Myanmar, Kazakhstan, Botswana, Russia and more than twenty countries and regions, not only cooperation commercially, but also technical exchange, so that our production could meet customer demand, and close towards the international market standards.

3. 20 years manufacturing, sales and installation experience on oil process project.

4. 38 technical engineers research on new efficient processing craft and instruct manufacturing and installation.

5. 78 processional installation team with rich and mature installation and training experience.

6. CE, ISO9001 and SGS certified.

Raw material and finished Oil products Storage equipments

Oil seeds pretreatment and press production line: 5-4000T per 24 hrs

Solvent extraction production line: 10-4000T per 24 hrs

Edible oil refinery production line: 1-600T per 24 hrs

Oil fractionation engineering

Biodiesel production line: 1-600T per 24 hrs

1.High oil yield:The oil yield of our product is higher 3-6% than old equipment,which can make considerable profits.

2.Energy saving:Energy eauals to lower production of electric power 40%,saving an average of 6 kilowatt-hour basis,saving 36 RMB per day production of electricity.

3.High purity of oil:LD filter residue, which ensure the pureness of the oil.

4. Small occupied area:The oil workshop can be used when the area of it is only 10-20 square meters.

Some pictures of soybean oil making machine:

Nude packing and export wooden case or other packaging for soybean oil making/refining machine as required .

If you interested in soybean oil plant project or cooking oil making machine please contact me.

Skype： taishan0072e Shi (Skype: Skype： taishan0072e Shi)
whatsapp:+Skype： taishan0072 157 3674 8761
Website:Skype： taishan0072.hnkingdo.com/ , https://717455.onloon.cc/
Henan Hi-tech Kingdo industrial Co., Ltd.

1